Installation and Initial
Configuration
Intel® NetStructure™ 7110/7115 e-Commerce Accelerator
installation and initial configuration instructions are in this chapter.
Before You Begin
WARNING: Do not
remove the cover. There
are no user-servicable
parts inside.
Before you begin installation, you need the following:
• IP address for 7110/7115 (only if you intend to use the Remote
Management)
• IP addresses and ports of servers.
• Keys/certificates. See Chapter 3 for information on obtaining
keys and certificates.
• Network cables, such as straight-through and/or crossover
cables. (Procedures in the section,“Wiring Connections” in this
chapter will identify the types of cables you must use.) If you are
installing the 7110/7115 in a rack, you will also need:
• Phillips screwdriver
• Rack-mounting screws