C H A P T E R 5 Command Reference
5-27
Remote Management Commands
Command Description
set ip Assign an IP address and netmask to the 7115’s network interface
for Telnet and SSh sessions.
CAUTION: The assignment of an IP address introduces security
issues. Please refer to the “Access Control” section of Chapter 6.
NOTE: To disable a currently configured IP, use set ip followed
by none.
Example:
Intel 7115> set ip
Enter IP Address (’none’ to delete)
[10.1.2.124]:
Enter Netmask [255.255.0.0]:
set
max_remote_sessions
Set the maximum allowed number of concurrently running Telnet
and SSh sessions.
Syntax:
Intel 7115> set max_remote_sessions <1-5>
where <1-5> is the maximum number of remote sessions you
wish to allow. Default: 5.