Filter
Top Products
C H A P T E R 5 Command Reference
5-29
show telnet_port Display the port on which Telnet sessions are currently accepted.
Example:
Intel 7115> show telnet_port
Telnet port: 23
set ssh Enable or disable Secure Shell (SSh) sessions. When this
command is set to “enable” and an IP address is assigned to the
7115’s network interface, you can access the device’s CLI via
remote SSh session. When disabled, the device refuses SSh
connections. Default: disable.
Syntax:
Intel 7115> set ssh <enable|disable>
show ssh Display current SSh status: enabled or disabled.
Example:
Intel 7115> show ssh
SSH: Disabled
set ssh_port Set the port on which SSh connections are accepted. (Default port:
22.)
Syntax:
Intel 7115> set ssh_port <port>
where <port> is the number of the port to which SSh sessions
will connect.
show ssh_port Display port on which SSh sessions are currently accepted.
Example:
Intel 7115> show ssh_port
SSH port: 22
.
Command Description