Filter
Top Products
C H A P T E R 5 Command Reference
5-25
Operational Commands
Command Description
bypass
WARNING: Do not issue
the bypass command from a
remote management session
(Telnet or SSh). Doing so
will result in an immediate
disconnect from the 7110/
7115.
Enables bypass mode, in which traffic flows through 7110/7115
without being processed. See Failure/Bypass Modes in Appendix
B for details. See the inline command below for reversing bypass.
Example:
Intel 7115> bypass
The LED labeled “inline” on the 7110/7115’s front panel turns off
when bypass is enabled.
NOTE: The 7110/7115 can be placed in bypass mode
simultaneously with the bypass switch and the CLI’s bypass
command. When this occurs, you must use both the bypass switch
and the CLI’s insert command to return the unit to inline mode.
inline Enables inline mode, in which the 7110/7115 processes traffic
normally. (As opposed to bypass mode, in which traffic may flow
through the device unprocessed.)
Example:
Intel 7115> inline
The LED labeled “inline” on the 7110/7115’s front panel is
illuminated when inline mode is enabled.
NOTE: Other factors may preclude the use of inline mode. See
Failure/Bypass Modes in Appendix B.