Filter
Top Products
C H A P T E R 2 Installing the 7110/7115 Free-Standing or in a Rack
2-5
2. Type an appropriate name in the Name field of the Connection
Description window (e.g., “Configuration”), and then click the
OK button. The Phone Number panel appears.
3. In the Connect Using… field specify “Direct to COM1” (or the
serial port through which the PC is connected to the 7110/7115 if
different from COM1).
4. Click the OK button. The COM1 Properties panel appears. Set
the values displayed here to 9600, 8, none, 1, and none.
5. Click the OK button.
HyperTerminal§ Paste Operations
If you’re using Hyperterminal§ you must make the following
configuration change:
1. In the File menu, click Properties.
2. Click the Settings tab.
3. Click the ASCII Setup button.
4. Change the values of Line and Character delay from 0 to at least
1 millisecond.
5. Click OK twice to exit.