Filter
Top Products
C H A P T E R 3 Intel® NetStructure™ 7110/7115 e-Commerce Accelerator User Guide
3-6
There are three ways to obtain keys and certificates:
• Obtaining a certificate from VeriSign§ or other certificate
authority
• Using an existing key/certificate
• Creating a new key/certificate on the 7110/7115
Cutting and Pasting with HyperTerminal§
Cutting and pasting is an integral part of the next several procedures.
Below are procedures for cutting and pasting in HyperTerminal§. If
you use some other terminal program, consult that product’s
documentation for appropriate procedures.
To copy an item (key, certificate signing request, etc.) from
HyperTerminal§:
1. Open the HyperTerminal§ window.
2. Click and drag to select the item.
3. After the item is selected, open the Edit menu and click Copy (or
type <ctrl-c>).
4. Open the window where you will paste the data, and position the
cursor at the appropriate point.
5. In the Edit menu, click Paste (or type <ctrl-v>).
To paste an item (key, certificate signing request, etc.) into
HyperTerminal§:
1. Display the item in the appropriate application window, then
click and drag to select the item.
2. Once the item is selected, click the Edit menu and select Copy
(or type <ctrl-c>).
3. Move to the HyperTerminal§ window, and position the cursor at
the appropriate point.
4. Pull down the Edit menu, and select Paste to Host (or type
<ctrl-v>).