Filter
Top Products
C H A P T E R 6 Access Control
6-21
Access Control
The 7110/7115 provides block and permit commands which allow
you to deny or allow clients to access servers based on IP, IP mask,
port and port mask.
To block a client, specified by IP and IP mask, from accessing a
specified server, use the create block command as illustrated below:
NOTE: To show, list or
delete blocks and permits,
see the Command
Reference in Chapter 5.
Intel 7115> create block
Client IP to block [0.0.0.0]: 10.1.2.1
Client IP mask [0.0.0.0]: 255.255.255.255
Server IP to block [0.0.0.0]: 20.1.2.1
Server IP mask [0.0.0.0]: 255.255.255.255
Server Port to block: 80
Server Port mask [0xffff]:<Enter>
To permit a client, specified by IP and IP mask, access to a specified
server, use the create permit command as illustrated below:
Intel 7115> create permit
Client IP [0.0.0.0]: 10.1.2.1
Client IP Mask [0.0.0.0]:255.255.255.255
Server IP [0.0.0.0]:20.1.2.1
Server IP Mask [0.0.0.0]:255.255.255.255
Server port [xx]: 443
Server port mask [0xffff]: <Enter>