Filter
Top Products
16
INITIAL SETTINGS (cont.)
Selecting the playback
source
This unit consists of two main components—the HDD
deck and the DVD player.
• For detailed operations about the HDD, see pages 21
to 46.
• For detailed operations about the DVD player, see
page 47 to 65.
1
Turn on the power.
On the remote control
Press .
On the unit
Press
STANDBY/ON
.
• The lamp corresponding to the previously selected
playback source (either DVD or HDD) lights on the
unit.
• First time you turn on the power, the AUTO SET/T-V
LINK screen appear on the TV. (See page 13.)
2
Select the either HDD deck or DVD player.
On the remote control
1
Set the
DVD/TV/HDD
selector to the respective
position—either to the right (
HDD
) or to the left
(
DVD
).
2
Press
ENTER
.
• You can also press
LIVE
for the HDD deck.
On the unit
Press
DVD/HDD
so that the respective lamp (either HDD
or DVD) lights.
• The opening screen appears on the TV.
NOTE
When the Timer Programming or HDD Setup menu screen (see
pages 40, 42, and 66) is shown on the TV, you cannot change
the playback source from the HDD deck to the DVD player.
Before performing any operations:
• Turn on the TV and select an appropriate input (AV)
mode.
• During the following periods, the unit will not
accept any button operation:
- If the unit is plugged in: For about 30 seconds. The
illumination lamp on the unit flashes during this
period.
During this period, disc insertion will not
be accepted either.
- If the unit is turned on with the HDD deck selected:
For about 20 seconds.
During this period, the opening screen appears.
1
2
2
1
About the opening screen
The opening screen appears on the TV when you turn
on the unit.
• When you start playing a disc with the DVD player
selected, the following messages will be shown at
the bottom of the screen.
• NOW READING (The unit is reading the disc
information.)
• REGION CODE ERROR! (The region code of the
DVD Video disc does not match the unit. The disc
cannot be played back.)
• EJECT
• LOADING
• NO DISC
NOW READING
Message area