Filter
Top Products
66
CHANGING THE INITIAL SETTINGS
Changing the HDD/TV
tuner settings
Without changing the HDD settings (which includes the
built-in TV tuner setting), you can use the HDD deck.
However, it is recommended to change them as you
prefer so that the operation of this unit become easier and
convenient.
The unit provides the three main setting items—HDD SET
UP, FUNCTION SET UP, and INITIAL SET UP.
The table below shows the HDD and the built-in TV
tuner setting items.
Basic procedure
Example:
To set “L-1 OUTPUT” to “S-VIDEO” under the
“INPUT/OUTPUT” items of the “FUNCTION SET UP”
menu.
1
Show the Main Setup screen.
NOTE
• If the built-in clock has not been set, the INTIAL SET UP
screen appears. If this happens, set the clock first (see page
69).
2
Select one of the main menu screen.
3
Select one of the sub-menu screens.
NOTE
When changing the HDD SET UP items, skip this step.
4
Select an item (in this example, “L-1
OUTPUT”) you want to change.
Press
∞
or
5
to move to “L-1 OUTPUT,” then press
ENTER
.
5
Select an option for the setting.
Press
∞
or
5
to select “S-VIDEO” (in this example), then
press
ENTER
.
6
Finish the setting.
Press
SETUP
repeatedly until menu screens disappear.
When using the remote control, slide the
DVD/TV/
HDD
selector to the right (
HDD
), then press
ENTER
.
HDD SET UP
LIVE MEMORY
(See page 67)
AUDIO REC
(See page 67)
JUMP TIME
(See page 67)
FUNCTION SET UP
FUNCTION
(See page 67)
• O.S.D.
• DIRECT REC
INPUT/OUTPUT
(See page 68)
• L-1 OUTPUT
• L-1 INPUT
• L-2 SELECT
• L-2 INPUT
• F-1 INPUT
FAMILY
(See page 68)
INITIAL SET UP
TUNER SET
• AUTO CH SET (See page 70)
• MANUAL CH SET (See page 71)
INITIAL SET
• CLOCK SET (See page 69)
• GUIDE PROG SET (See page 69)
• SAT CONTROL SET (See page 17)
2–5
1, 6
Press
SET UP
.
• The HDD SET UP screen
appears.
Press
3
or
2
to show one of
the three main menu—HDD
SET UP, FUNCTION SET UP,
or INITIAL SET UP. (In this
example, FUNCTION SET
UP.)
1
Press
∞
to move to
one of the sub-menu
screens.
2
Press
3
or
2
to move
to your desired submenu.
(In this example, select
“INPUT/OUTPUT.”)
FUNCTION SET UP
LIVE MEMORY 1 HR
JUMP TIME 1 HR
AUDIO REC MONO
HDD SET UP INITIAL SET UP
SET UP
EXIT
SELECT
ENTER
SELECT WITH [ ]
THEN PRESS [ENTER]
FUNCTION SET UP
FUNCTION
O.S.D.
DIRECT REC
OFF
ON
INPUT/OUTPUT FAMILY
HDD SET UP INITIAL SET UP
SET UP
EXIT
SELECT
ENTER
SELECT WITH [ ]
THEN PRESS [ENTER]
FUNCTION SET UP
LIVE MEMORY 1 HR
JUMP TIME 1 HR
AUDIO REC MONO
HDD SET UP INITIAL SET UP
SET UP
EXIT
SELECT
ENTER
SELECT WITH [ ]
THEN PRESS [ENTER]