Filter
Top Products
71
To set the built-in TV tuner manually—Manual
Channel Setup
You can store the station which cannot be stored using
Auto Setup (see page 13), TV-Linked Setup (see page 14)
or Auto Channel Setup (see page 70).
1
Press SET UP.
2
Press
3
or
2
to move
to “INITIAL SET UP,” then
press
∞
.
3
Press
3
or
2
to move
to “TUNER SET,” then press
ENTER.
4
Press
∞
or
5
to move
to
“MANUAL CH SET,” then
press ENTER.
The confirmation screen
appears.
• The
confirmation
screen
and the programme
currently being broadcast
by the selected (flashing)
channel appear alternately for about 8 seconds
each.
5
Press
3
/
2
/
∞
/
5
to
select an unoccupied
programme position
number in which you want
to store a station, then
press ENTER.
6
Press
∞
or
5
to select
either regular TV station
(CH) or cable system (CC),
then press
3
.
• Each time you press
∞
or
5
, CH (regular TV
station) and CC (cable
system) alternately
appears.
7
Press the number buttons to enter the station
channel number you want to store.
• Enter “0” before any single number entries.
• To enter the preset station name (ID—see pages 73
and 74), press
3
until “– – – –” (ID setting) begins
flashing, then press
∞
or
5
. (To set station names
other than the preset ones, see page 73.)
• For fine tuning adjustment, press
3
repeatedly until
“+/–” begins flashing, then press
∞
or
5
for fine
tuning While tuning, “+” or “–” appears.
8
Press ENTER to store the new station.
The Confirmation screen appears.
9
Repeat steps 5 to 9 to store other new stations.
10
Press SET UP three times to finish the setting.
NOTE
Guide programme numbers are not set when the stations are
stored manually. If you try to make a timer programming with
the VIDEO P
LUS
+
®
system, “GUIDE PROGRAM IS NOT SET
GUIDE PROG THEN RETRY” appears on the TV; set the Guide
Program numbers
(see page 72)
manually.
To delete a station
1
Show the confirmation screen for Manual Channel
Setup.
1
Press SET UP.
2
Press
3
or
2
to move to “INITIAL SET UP,” then
press
∞
.
3
Press
3
or
2
to move to “TUNER SET,” then
press ENTER.
4
Press
∞
or
5
to move to “MANUAL CH SET,”
then press ENTER.
2
Press
3
/
2
/
∞
/
5
to select a programme position
number in which a station you want to delete is
stored.
3
Press CANCEL to delete the station from the
programme position.
The stored stations below the deleted station are re-
assigned their programme positions.
4
Repeat steps 2 to 3 to delete all unnecessary stations.
5
Press SET UP three times to finish the setting.
BBC1
BBC2
ITV
CH4
CH5
26
33
23
30
37
[ENTER]
[CANCEL]
[SET UP]
BBC1
BBC2
ITV
CH4
CH5
26
33
23
30
37
[ENTER]
[CANCEL]
[SET UP]
(Example) To store in
position 06.
06 CH21
[ENTER]
[SET UP]