Filter
Top Products
72
CHANGING THE INITIAL SETTINGS (cont.)
To change the programme position number
assigned to a station
1
Show the confirmation screen for Manual Channel
Setup.
1
Press
SET UP
.
2
Press
3
or
2
to move to “INITIAL SET UP,” then
press
∞
.
3
Press
3
or
2
to move to “TUNER SET,” then
press
ENTER
.
4
Press
∞
or
5
to move to “MANUAL CH SET,”
then press
ENTER
.
2
Press
3
/
2
/
∞
/
5
to select a programme position
number in which a station you want to move is
stored, then press ENTER.
The channel number (under “CH”) and station name
(under “ID”) start flashing.
3
Press
3
/
2
/
∞
/
5
to select a new programme
position number for the station you have selected,
then press ENTER.
• Example: If you moved the station in position 4 to
position 2, the stations originally in
positions 2 and 3 are reassigned the new
position numbers.
4
Repeat steps 2 and 3 as necessary.
5
Press SET UP three times to finish the setting.
To fine-tune the station channel
1
Show the confirmation screen for Manual Channel
Setup.
1
Press SET UP.
2
Press
3
or
2
to move to “INITIAL SET UP,” then
press
∞
.
3
Press
3
or
2
to move to “TUNER SET,” then
press
ENTER
.
4
Press
∞
or
5
to move to “MANUAL CH SET,”
then press
ENTER
.
2
Press
3
/
2
/
∞
/
5
to select a programme position
number in which a station you want to fine tune is
stored, then press ENTER.
The channel number (under “CH”) and station name
(under “ID”) start flashing.
3
Press ENTER again.
The Manual Channel Setup screen appears.
4
Press
3
repeatedly until “+/–” begins flashing.
5
Press
∞
or
5
to fine tune the picture to obtain the
best picture.
6
Press ENTER.
The confirmation screen appears.
7
Repeat steps 2 to 6 to fine tune other stations.
8
Press SET UP three times to finish the setting.
To assign the station names
To assign the preset station names (see the tables on
pages 73 and 74)
1
Show the confirmation screen for Manual Channel
Setup.
1
Press SET UP.
2
Press 3 or 2 to move to “INITIAL SET UP,” then
press ∞.
3
Press 3 or 2 to move to “TUNER SET,” then
press ENTER.
4
Press ∞ or 5 to move to “MANUAL CH SET,”
then press ENTER.
2
Press ∞ or 5 to select a programme position number
in which a station you want to assign a name to is
stored, then press ENTER.
The channel number (under “CH”) and station name
(under “ID”) start flashing.
3
Press ENTER again.
The Manual Channel Setup screen appears.
4
Press 3 repeatedly until
the station name (under
“ID”) starts flashing.
5
Press ∞ or 5 to select a
new station name.
• Each time you press the
button, preset names
change.
BBC1
ITV
CH4
BBC2
CH5
26
23
30
33
37
BBC1
BBC2
ITV
CH4
CH5
26
33
23
30
37
[ENTER]
[SET UP]
[ENTER]
[CANCEL]
[SET UP]
[ENTER]
[SET UP]