Support User Manuals

Raritan Computer 255-30-6000-00 Home Theater Server User Manual

Open as PDF

of 239

General Update Procedure

154

7. (Optional)Forsomeversions,suchasversion4.2,theassociated

releasenotesarenotcoveredinthedownloadedfirmwarefile,so

locatethereleasenotesanddownloaditbyrepeatingtheabovesteps

4to6.

8. Readthereleasenotesforanynecessaryinformation.

¾

STEP 2: Establish a connection between the device and

the PC running Paragon Update

ThedeviceintendedtoupgrademustbeconnectedtothePCthatwillrun

theParagonUpdateutility.Therearetwotypesofconnections

dependingonyourdevice.

• Network:IfyourdevicecomeswithaLANport,suchasParagonII

MainUnit,upgradeitbyconnectingittothenetworkan

dassigning

anIPaddresstoit.However,forParagonIIStackingUnit,itmustbe

upgradedbyconnectingtotheMainUnitwhichisconnectedtothe

network.

• RS‐232Cable:Forthosedeviceswithoutthenetworkport,suchas

userstations,thisistheonlymethodtoupgr

adethem.Connectthe

devicetooneoftheserialportsofthePCthatrunstheParagon

UpdateutilityviatheRS‐232cable.

Note:OneDB9male‐to‐femaleserial(RS‐232)cableisshippedwith

theuserstation.Itisadirectcablethatcanbeusedtoupgradethe

firmwarewithTXD,RXDandGNDsignals.

previous next