Filter
Top Products
Chapter 7 Help & Assistance
Chapter 7 Help & Assistance
147
7. Loosen the screw on the door (don’t remove the
screw, just loosen it).
Note: Don’t use a coin to loosen the screws
because it could fall into the TV.
8. Press the catch tabs on either side of the screw
you just loosened (one tab is above the screw
and one is below), and remove the entire lamp
access door. Place the door to the side (don’t put
it on the floor or anywhere someone might step
on it or accidentally break the tabs).
Step 7
Loosen this screw
Step 8
Press in
on the tabs
Step 8
Press in
on the tabs
9. Loosen the two thumb screws on the lamp unit
inside the TV (the screws stay with the unit so just
loosen them, don’t remove them).