Filter
Top Products
Chapter 2 Connections & Setup
Chapter 2 Connections & Setup
17
How to Connect: TV + VCR + DVD
1. Connect your DVD Player to your TV
A. Connect one end of the S-Video cable to the INPUT1 S-VIDEO jack on the TV. Connect the other end to
the S-VIDEO jack on your DVD Player.
B. Connect the audio cables (white and red) to the INPUT1 AUDIO jacks on the back of the TV (L and R)
and to the Audio Output Jacks on the DVD Player (sometimes labeled OUT R and L).
2. Connect your VCR to your TV
A. Connect one end of a coaxial cable to the ANTENNA A IN jack on your TV. Connect the other end to the
Output Jack on your VCR (sometimes labeled OUT TO TV).
B. Connect the audio cables (white and red) to the INPUT2 AUDIO jacks on the back of your TV (L and R)
and to the Audio Output Jacks on your VCR (sometimes labeled OUT L and R).
C. Connect the video cable (yellow) to the INPUT2 VIDEO jack on the back of your TV and to the Video
Output Jack on your VCR (sometimes labeled VIDEO).
3. Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your VCR
(sometimes labeled IN FROM ANTENNA or IN FROM ANT).
4. If you have a satellite dish, connect the dish antenna cable to the back of the TV.
Connect the coaxial cable from the dish antenna (or multi-switch) to the SATELLITE IN jack on your TV
Note: Your LCOS TV is a fully integrated HDTV that is capable of receiving DIRECTV
®
programming, but you
must connect a DIRECTV Multi-Satellite Dish and order programming from DIRECTV.
Go to page 23
Step 2
Quality: Very Good