Filter
Top Products
Chapter 2 Connections & Setup
Chapter 2 Connections & Setup
19
How to Connect: TV + VCR + DVD
1. Connect your DVD Player to your TV
A. Connect the audio cables (white and red) to the INPUT1 AUDIO jacks on
the back of the TV (L and R), and to the Audio Output Jacks on the DVD
Player (sometimes labeled OUT L and R).
B. Connect the video cable (yellow) to the INPUT1 VIDEO jack on the back of
your TV, and to the Video Input Jack on your DVD Player (sometimes
labeled VIDEO OUT).
2. Connect your VCR to your TV
Connect one end of a coaxial cable to the ANTENNA A IN jack on your TV.
Connect the other end to the Output Jack on your VCR (sometimes labeled
OUT TO TV).
3. Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet, cable box, or antenna to the
Input Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM
ANT).
4. If you have a satellite dish, connect the dish antenna cable to the back of
the TV.
Connect the coaxial cable from the dish antenna (or multi-switch) to the
SATELLITE IN jack on your TV.
Note: Your LCOS TV is a fully integrated HDTV that is capable of receiving
DIRECTV
®
programming, but you must connect a DIRECTV Multi-Satellite Dish
and order programming from DIRECTV.
Go to page 23
Step 2
Quality: Good