Filter
Top Products
Chapter 5 Features
Chapter 5 Features
93
Profiles: The TV Setup
You can establish TV channel lists, set spending limits, and set rating limits for TV
programs using the TV Setup menu.
Editing Channels in a TV List
You should create a TV channel list to establish which TV channels (including both
analog and digital) the selected profile can access. To create the TV channel list:
1. Select a user.
2. Select Edit Channels.
3. Use the arrow buttons to highlight a TV channel, and press OK to remove (or
replace) the check mark. To go directly to a certain channel, enter its number
using the digits on the remote control. Or, page through the list using the
channel up and down buttons.
Note: if you’re using two terrestrial antennas, press the ANT button on the
remote to edit the other antenna’s channel list when you are in TV mode.
Checkmarked items appear in the channel list. In other words, when you select that
profile and begin surfing through TV channels with the channel buttons, only the
checkmarked channels will appear as you surf.
Note: the only channels that you can add to a list are the channels that were
found during the channel search (for details on automatically searching for
channels, go to page 116 in Chapter 7).