Filter
Top Products
Chapter 2 Connections & Setup
Chapter 2 Connections & Setup
27
POWER
VIDEO
AUDIO
L
R
INPUT1
INPUT2
INPUT3
S-VIDEO
AUDIO
R
L
YP
B PR
AUDIO OUTPUTS
FIXED
VARIABLE
LR L
R
EXT SPEAKERS
EXT
INT
L
R
++
COMPONENT VIDEO INPUT
DIGITAL
AUDIO OUT
ANTENNA A
IN
ANTENNA B
IN
SATELLITE
IN
PHONE
JACK
ACCESS
CARD
Back of the LCOS TV
This section describes each of the Input Jacks on the back of TV. When connecting
A/V cables, be sure to connect corresponding outputs and inputs (video to video,
right audio to right audio, etc.).
ANTENNA B IN Use to connect an off-air or terrestrial antenna or cable TV signal
to the TV.
ANTENNA A IN Use to connect a second off-air or terrestrial antenna or cable TV
signal to the TV.
SATELLITE IN Use to connect the DIRECTV Multi-Satellite Dish antenna to the TV
using an RG6 cable.
ACCESS CARD Your TV has an access card inserted into this slot. If you ever
need to replace the card, make sure the contacts on the access card are facing left
and the top of the card is facing right while inserting (for details, go to page 142 in
Chapter 7.) The DIRECTV System requires a valid card.
PHONE JACK Use to connect a phone line to the TV. The DIRECTV System
requires a continuous phone line connection to periodically call out to program
providers.
DIGITAL AUDIO OUT Use a digital optical cable (or SPDIF cable) to connect your
TV to a compatible Dolby Digital receiver or decoder. Dolby Digital offers theatre-
quality sound (six audio channels).
Notes:
• Some receivers can only receive the signal from the optical cable when
the TV is in DIRECTV mode, not TV mode. As a precaution, connect the
audio cables to your TV and receiver so you won’t experience audio loss
when switching modes.
• This TV’s optical digital output jack fully complies with the international
standard governing this type of jack (IEC958), and is designed for
connection to a Dolby Digital (AC-3
®
or PCM) receiver or Dolby Digital
(AC-3 or PCM) decoder. Older equipment, some of which is not fully
compliant with IEC958, may not be compatible with the Dolby Digital
bitstream. Such a connection using anything other than Dolby Digital
AC-3 or PCM receiver or decoder could create a high noise level, causing
damage to headphones or speakers.
DIGITAL
AUDIO OUT
SATELLITE
IN
PHONE
JACK
ACCESS
CARD
Tip: ANTENNA jacks
You can also use the ANTENNA B IN (or
ANTENNA A IN) for video games and
switch between the two inputs using the
ANT button on the remote control.
ANTENNA A
IN
ANTENNA B
IN