Filter
Top Products
Chapter 3 The Remote Control
Chapter 3 The Remote Control
52
5. Repeat steps 4 and 5 to delete more functions.
6. When the selected functions are deleted press the CLEAR button to exit the IR
DELETE programming mode. (EXIT SETUP appears in the remote’s display and
the remote returns to its original operation mode).
Notes:
• Press the CLEAR button at any time to exit the programming mode (EXIT
SETUP will appear to confirm that no new codes have been entered).
• If about 30 seconds passes before a button is pressed, the LCD display
window will stop transmission to conserve battery life. If this occurs,
restart from step 1.
• To delete all learned keys at one time, do an operations reset or a
manufacturer’s reset (go to page 58 for instructions).
How to Use the Volume Lock Feature
This programming mode will lock the volume of the components that have volume
control. You may need to experiment with your system since products made by
different manufacturers work differently.
Locking the Volume (VOL LOCK)
1. Press and hold (the backlight button) until CODE SET appears in the
remote’s display.
2. Step through the programming menu by pressing the down arrow button until
VOL LOCK appears in the remote’s display window, then press the OK button.
3. The display message TO MODE appears, prompting you to enter the
component to apply the volume lock.
4. Push the component button of your choice to apply the VOL LOCK mode.
5. If you’ve pressed a valid component button, SUCCESS appears, followed by
EXIT SETUP.
DIRECTV
VCR
1
VCR
2
ON•OFF
TV
DVD
AUX
AUD
M1
L1
M2
L2
M3
L3
FRONT
SKIPMUTE
CH +
VOL +VOL -
CH -
CENTERREAR
GO
BACK
FORMAT
TEST
GUIDE INFO
AM•FM
OK LEVEL +LEVEL -
MENU
PROGRAM
CLEAR
123
456
789
0
INPUT ANT
FUNCTION
STOP PAUSEREC
PLAY FWDREV
SWAP
CH
CTRL
PIP WHO
DSP
ON•OFF
DSP
MODE
DELAY
Display
window
Component
buttons
The down
arrow button
The OK
button
Backlight
button