Filter
Top Products
(4) Copy process
This model basic process and structure
• The Scorotron method is used to evenly charge the photoconduc-
tor surface to the given potential in the charge process. The
corona wire regularly used is now replaced with a new corona
charge mechanism that employs the 0.1mm thick stainless steel
saw teeth plate, in order to suppress ozone generated when the
oxide molecule in air is ionized.
• Considering the service efficiency, the process separation
mechanism is adopted.
• To prevent high voltage leakage by the loose corona charge unit, a
one-touch stopper mechanism is adopted.
(1) Photoconductor
• This model uses OPC (organic photoconductor) as photoconduc-
tive material. (φ50 mm)
Stirring roller
MG roller
Proccess
unit
DV drive unit
Main drive unit
Main motor
Fuser unit
PS roller
Multi manual
insertion paper
feed unit
(Option)
Cleaner
unit
Paper exit
roller
Transport
roller(upper)
Transport
roller(lower)
Paper feed
rive unit
Paper feed
unit
Paper feed
unit
Transport
unit
OPC layer CTL (Electric charge moving layer)
CGL (Electric charge generating layer)
Aluminum layer
5 – 8