Filter
Top Products
Main code Sub code Content
09 03 ADU rear edge plate aging (SF-2120 only)
The rear edge plate is returned to the initial position and shifted to the following size positions.
AB series
A3 B4 A4R B5R A4 B5 Home position
Inch series
WLT LG LTR LT INV Home position
AB series foolscap area
A3 B4 FC A4R A4 Home position
Inch series foolscap area
WLT LG LTR LT INV Home position
04 ADU alignment plate aging (SF-2120 only)
The alignment plate is returned to the initial position and shifted to the following size positions.
AB series
A3 B4 A4R B5R A4 B5 Home position
Inch series
WLT LG LTR LT INV Home position
AB series foolscap area
A3 B4 FC A4R A4 Home position
Inch series foolscap area
WLT LG LTR LT INV Home position
05 Gate solenoid ON/OFF check (SF-2120 only)
The gate solenoid is turned on/off periodically.
10 — Toner motor aging
The toner motor is turned on.
14 — Cancel of troubles (except for U2)
Troubles (except for U2) are canceled and the simulation is also canceled automatically.
15 — Cancel of waste toner full (è blinks)
The waste toner full indication (è blinks) is canceled, and the simulation is also canceled automatically.
16 — U2 trouble cancel
U2 trouble is canceled, and the simulation is automatically canceled.
20 (Note) Maintenance counter clear
The maintenance counter is cleared and the maintenance counter value is displayed on the copy quantity display.
(“000” is displayed because the counter value is cleared.)
(Note) Cleared by entering the sub code “01.”
8 – 7