Filter
Top Products
Teledyne API T703/T703U Calibrator Operation Manual Communications
121
5.6.1.1. Manually Configuring the Network IP Addresses
Here are several circumstances when you may need to manually set the Ethernet
configuration:
Your LAN is not running a DHCP software package,
The DHCP software is unable to initialize the calibrator’s interface;
You wish to configure the interface with a specific IP address, such as for a
permanent Ethernet connection..
Manually configuring the Ethernet interface requires that you first turn DHCP to OFF
before setting the INSTRUMENT IP, GATEWAY IP and SUBNET
MASK parameters:
07223C DCN6572