Filter
Top Products
Teledyne API T703/T703U Calibrator Operation Manual General Troubleshooting & Service
163
Top: the CLR button is available to clear the warning message displayed in the Param field.
Bottom: the MSG button indicates that at least one warning message has not yet been cleared
.
The calibrator also alerts the user via the Serial I/O COM port(s) and causes the FAULT
LED on the front panel to blink.
To view or clear the various warning messages press:
Once the last warning has
been cleared, the MESSAGE
FIELD will return to displaying
the currently selected TEST
FUNCTION and value.
Suppresses the
warning messages
Press CLR to clear the current
message.
If more than one warning is
active, the next message will take
its place.
NOTE:
If a warning message persists after
several attempts to clear it, the message
may indicate a real problem and not an
artifact of the warm-up period
STANDBY SYSTEM RESET
TEST GEN STBY SEQ MSG CLR SETUP
STANDBY SYSTEM RESET
TEST GEN STBY SEQ MSG CLR SETUP
STANDBY SYSTEM RESET
TEST GEN STBY SEQ MSG CLR SETUP
SYSTEM ANALOG CAL WARNING
TEST CLR SETUP
MSG returns the active
warnings to the message
field.
STANDBY ACT =STANDBY
<TST TST> GEN STBY SEQ SETUP
07223C DCN6572