Filter
Top Products
APPENDIX A-1: Software Menu Trees Teledyne API - Models T703, T703U, 703E MENU TREES (05745E DCN6572)
A-6
INET
1
ID
EDITSET><SET
COM1
COM2
1
BAUD RATE
300
1200
2400
4800
9600
19200
38400
57600
115200
QUIET
COMPUTER
SECURITY
E, 8, 1
E, 7, 1
RS-485
SECURITY
MULTIDROP PROTOCOL
ENABLE MODEM
ERROR CHECKING
XON/XOFF HANDSHAKE
HARDWARE HANDSHAKE
HARDWARE FIFO
COMMAND PROMPT
ON
OFF
EDITSET>
DHCP
ON OFF
INSTRUMENT IP
2
GATEWAY IP
2
SUBNET MASK
2
TCP PORT
3
HOSTNAME
4
EDITEDIT
MAIN MENU
SETUP MORE
COMM
VARS
DIAG
5
TEST PORT
TEST
ENTER PASSWORD: 818
<SET
EDIT
PRNTJUMPNEXTPREV
0) PHOTO_LAMP=[Value]DegC
1) O3_GEN_LAMP=[Value]DegC
2) O3_CONC_RANGE=[Value]PPB
3) O3_PHOTO_BENCH_ONLY=[ON/OFF]
4) ZA_PUMP_ENAB=ON/OFF]
5) STD_TEMP=[Value] DegC
6) STD_PRESS=[Value] In-Hg
7) CLOCK_ADJ[HH:MM:SS]
See SECONDARY SETUP Menu
DIAG Submenu
ENTER PASSWORD: 818
ENTER PASSWORD: 818
1
Model 703E: only appears if optional Ethernet PCA is
installed. NOTE: When Ethernet PCA is present COM2
submenu disappears.
2
IP, GATEWAY IP & SUBNET MASK are only editable when DHCP is
OFF.
3
Although TCP PORT is editable regardless of the DHCP state, do not
change the setting for this property.
4
HOST NAME is only editable when DHCP is ON.
5
DIAG Menu is inactive while instrument is in GENERATE mode.
SETUP X.X MACHINE ID:703 ID
0 7 0 3 ENTR EXIT
Toggle to set the ID code.
MODE
Figure A-4: SECONDARY SETUP Menu - Basic)
07223C DCN6572