Filter
Top Products
Teledyne API T703/T703U Calibrator Operation Manual Operating the Calibrator
73
Example: If all passwords are enabled, the following menu button sequence would be
required to enter the VARS or DIAG submenus:
SYSTEM ENTER SETUP PASS:0
8 1 8 ENTREXIT
SYSTEM ENTER SETUP PASS:0
0 0 0 ENTREXIT
SETUP X.X PRIMARY SETUP MENU
O3 SEQ CFG CLK PASS MORE EXIT
SETUP X.X SECONDARY SETUP MENU
COMM VARS DIAG EXIT
EXAMPLE: This
password enables the
SETUP mode
Press buttons
to set number
Calibrator enters selected menu.
STANDBY ACT =STANDBY
<TST TST> GEN STBY SEQ SETUP
NOTE
The instrument still prompts for a password when entering the VARS and DIAG menus, even if
passwords are disabled, but it displays the default password (818) upon entering these menus. The
user only has to press ENTR to access the password-protected menus but does not have to enter the
required number code.
07223C DCN6572