Teledyne T703U VCR User Manual


 
Teledyne API T703/T703U Calibrator Operation Manual Operating the Calibrator
47
4. OPERATING THE CALIBRATOR
The T703/T703U calibrator is a computer-controlled calibrator with a dynamic menu
interface for easy, yet powerful and flexible operation. All major operations are
controlled from the front panel touch screen control.
To assist in navigating the system’s software, a series of menu trees can be found in
Appendix A of this manual.
NOTE
The menu flowcharts in this manual depict the manner in which the front panel touchscreen is used to
operate the T703/T703U Photometric Calibrator. Please refer to Figure 3-3 for an illustration of how the
menu flowcharts correlate to the actual front panel.
The menu flowcharts depict typical representations of the display during the various operations being
described; they are not intended to be exact and may differ slightly from the actual display of your
system.
NOTE
When editing values in the software, the ENTR button may disappear if you select a value that is invalid
or out of the allowable range for that parameter (e.g. such as trying to set the 24-hour clock to 25:00:00).
Once you adjust the setting to an allowable value, the ENTR button will re-appear.
07223C DCN6572