Filter
Top Products
AD-4402 Page 103
10.
10.10.
10. Function List
Function ListFunction List
Function List
The function list stores parameters to control the indicator.
The parameter is stored in an item without power supply.
An item is classified by a category address, and is classified by an item number.
Refer to " 10.1.2. Outline of the Function List".
The category address has a symbol for the 7-segments display
There are two kind of the function mode to operate the function list.
Parameter settings The mode is used to change the parameter.
Referring Parameters The mode is used to refer the parameter in the
weighing sequence.
Example of an item:
Category address:
[Function] - [Function setting] - [General] - [Weighing]
genf- 1 Display update rate
1 5 times per second
Caution
When entering Parameter settings of the function mode, the current
weighing sequence are stopped.
10.1.1.
10.1.1.10.1.1.
10.1.1. Operation Keys
Operation KeysOperation Keys
Operation Keys
To enter the function list Press and hold the ENTER key and press the
key in weighing mode.
Select menu Function using the key and the
ENTER key.
To select an address of the parameter The , SHIFT + , ENTER, ESC keys.
To change the parameter The , SHIFT + , Alphanumerical, ENTER,
ESC keys.
To store it and exit the function list The ESC key.
(To return to weighing mode)
Item number
Category address symbol
Meaning of the address
An Item
Parameter
Address
Meaning of the parameter