Filter
Top Products
Page 94 AD-4402
9.
9.9.
9. Maintenance
MaintenanceMaintenance
Maintenance
9.1.1.
9.1.1.9.1.1.
9.1.1. Basic Operation
Basic OperationBasic Operation
Basic Operation
To enter the maintenance Press and hold the ENTER key and press the
key in weighing mode.
Select menu maintenance using the key and
the ENTER key.
To select an address of the parameter The , SHIFT + , ENTER, ESC keys.
To change the parameter The , SHIFT + , Alphanumerical, ENTER,
ESC keys.
To exit the mode The ESC key.
(To return to weighing mode)
9.2.
9.2.9.2.
9.2. Monitor Mode
Monitor ModeMonitor Mode
Monitor Mode
The monitor mode is used to check the indicator during the weighing sequence.
9.2.1.
9.2.1.9.2.1.
9.2.1. Monitoring Control I/O Function
Monitoring Control I/O FunctionMonitoring Control I/O Function
Monitoring Control I/O Function
Use to monitor the status of the I/O terminals.
9.2.2.
9.2.2.9.2.2.
9.2.2. Monitoring Built-in RS-485 Interface
Monitoring Built-in RS-485 InterfaceMonitoring Built-in RS-485 Interface
Monitoring Built-in RS-485 Interface
The current communication data are displayed.
123 kg
CONTROL 00010001000
a11 a1
I/O 00110100001
b11 b1
Input terminal A1
Output terminal B1
When [
genf- 1] is slow, it
may not display all data.
Sent data
123 kg
RNET
RNET0099,1234567,123456789
r5-485 rcu and 5nd
Received data
Parity: p
Framing:f