Filter
Top Products
AD-4402 Page 69
7.5.11.
7.5.11.7.5.11.
7.5.11. Error Message
Error MessageError Message
Error Message and Alarm
and Alarm and Alarm
and Alarm
When the indicator detects an error in the weighing system, an error message is
displayed.
When the indicator becomes to preset condition, it is announced with the preset
alarm.
Kind of Alarm and Error
There is the following priority.
Weighing sequence error < Zero error < Alarm 1 < Alarm 2
SQ.ERR ZR.ERR ALARM 1 ALARM 2
Kind No. Description
When the weighing can not continue, message is displayed and the
sequence is stoped. Cope with cause and restart the weighing.
0
The weighing sequencei stoped.
Cope with cause and restart the sequence.
1
Safety check can not complete.
Check the safety.
2
Under weight or over weight.
Compensate weight and restart.
3
There is conflict in setpoint
Check setpoint
4
Time over of batch weighing.
Check the gate and remains of hopper mat.
5
Time over of discharge.
Check the discharge gate.
6
The remain is not enough to weigh it.
Add the material.
7 When the batch is started, the weight is full already.
8
Nozzle is touched to hopper.
Check the nozzle.
Weighing
sequence
error
SQ.ERR
9 There is not tare (vessel) on the weighing pan.
SQ.ERR
SQ.ERRSQ.ERR
SQ.ERR
ALARM 1
ALARM 1ALARM 1
ALARM 1
Out of range
SQ.ERR
SQ.ERRSQ.ERR
SQ.ERR
Over or under
amount in the
result
Error message is displayed
Stop key
A
larm 1Weighing error
Error no.Kind of error
Principle alarm links, when
plural alarm is active.
Error no. Error no.