A&D PD4000243 Universal Remote User Manual


 
Page 50 AD-4402
Drawing: Plain Recipe Sequence
0
Weighing value
Material start signal (automatic)
Dribble flow, Output
Batch finish, Output
Over , Acceptable, Under, Output
Medium flow, Output
Full flow, Output
Material code, Output
Stable, Output
Discharge start, In
Discharge, Output
Recipe finish, Output
Discharge finish, Output
Recipe start command, Input
Recipe code, Input
Tare (automatic)
Tare clear (automatic)
Zero (automatic)
Eval delay timer
Comparison
Material code1
Material code2 Material code3
Recipe code 1 Recipe code 2
5qf-45
Recipe finish output on
When over or under weight occurs,
sequence stops and an error code
SQ.ERR2 is displayed. Restart to
continue this.
Zero before the recipe
start, if necessary
The material code
can not edit during
the recipe mode.
The active recipe code
is only read at each
start. And keep it.
Gross weight
Net weight
In semi-automatic mode,
make the start signal.
5qf-37
Comparison
Comparison
Discharge sequence example