Filter
Top Products
Page 16 AD-4402
4.
4.4.
4. Basic Operation
Basic OperationBasic Operation
Basic Operation
4.1.
4.1.4.1.
4.1. Key Operation Examples
Key Operation ExamplesKey Operation Examples
Key Operation Examples
This section is described the way of key operation.
4.1.1.
4.1.1.4.1.1.
4.1.1. Standby Mode
Standby ModeStandby Mode
Standby Mode
OFF Press and hold the OFF key above three seconds in the
weighing mode. Then the indicator enters the standby mode
and displays standby indicator.
In the standby mode, All interface is turned off and internal
circuit works only.
ON The ON key is used to turn on the indicator.
4.1.2.
4.1.2.4.1.2.
4.1.2. Cursor
CursorCursor
Cursor Operation
Operation Operation
Operation
There is the cursor on a segment (an item) that is turned on and off.
The key is used to move the cursor forward.
SHIFT + Press and hold the SHIFT key and press the key is used to
move the cursor backward.
ENTER The ENTER key is used to enter the selected item.
ESC The ESC key is used to return to the last mode and to undo the
last key operation.
4.1.3.
4.1.3.4.1.3.
4.1.3. Inputting
InputtingInputting
Inputting Characters
Characters Characters
Characters
The character can be input in a current segment (an item) in adaptable mode.
A/a The A/a key is used to change numerical key, upper keys, lower
keys and alphabetical key.
Alphanumerical The alphanumerical keys and the ENTER key is used to enter
the parameters and to select a code number directly.
ENTER The ENTER key is used to specify the alphanumerical data.
ESC The ESC key is used to undo the last key operation and to
return to the last mode.