![](http://pdfasset.owneriq.net/b/e4/be48f999-ef87-43f9-b40f-4d8752dfbf8f/be48f999-ef87-43f9-b40f-4d8752dfbf8f-bg1f.png)
AD-4402 Page 29
Tare of Material Code
Use to copy current tare to the preset tare.
Set a preset tare function [gebf-12 ] of the function list.
[gebf-12] [0] If the preset tare of the code is zero, the last tare value effects.
(factory settings)
[gebf-12] [1] If the preset tare of the code is zero, tare value is reset.
Step 1 Press and hold the ENTER key and press the key.
Then menu MatEdit blinks.
Step 2 Press the key to select menu Tare. And press the ENTER key.
Step 4 Specify a code number using numerical keys and press the ENTER key.
Then current tare value is copied to preset tare.
Step 5 Press the ESC key to return to weighing mode several times.