A&D PD4000243 Universal Remote User Manual


 
AD-4402 Page 117
Category
address
symbol
Name Descriptions
Range
and
choices
Default
5q f-39
Discharge
monitoring timer
Set the time limit to discarge it
When time is up and weighing value is
not zero band, sequence error
SQ.ERR5 is displayed.
If 0 is set, the timer does not work.
0 to
65535 s
0 s
5q f-40
Discharge gate
close delay timer
Set the wating time from reacheing to
zero band to closing discharge gate for
gross.
0.1 to
25.5 s
0.1 s
5q f-43
Batch finish output
on
Set the active (ON) time of batch finish
signal. If 0 is set, output is kept until next
sequence.
0.00 to
2.55 s
0.00 s
5q f-44
Discharge finish
output on
Set the time to keep the ON for
discharge signal.
0.00 to
2.55 s
0.00 s
5q f-45
Recipe finish output
on
Set the time to keep the ON for recipe
finish signal.
0.00 to
2.55 s
0.00 s
5q f-46
Mixing finish output
on
Set the time to keep the ON for mixture
finish signal.
0.00 to
2.55 s
0.00 s
5q f-47
Mixing time output
on
Set the time to keep the ON for mixture
time signal.
0 to
255 s
0 s
5q f-48
Averaging Eval time
Set the time to average the result. This
time controls precision of the result.
Refer to Eval delay timer [5q
f-37] and Eval conditions [5q
f-13].
00.0 to
2.55 s
0.00 s
s : second
d: digit