Filter
Top Products
AD-4402 Page 113
Category address
:
[Function] - [Function setting] - [Sequence] - [Basic]
Category
address
symbol
Name Descriptions
Range
and
choices
Default
5q f- 1
Weighing mode
1: Constomer programmed control
2: Sequential weighing
1 to 2 2
5q f- 3
Loss-in weight
0: Normal batch weighing
1: Loss-in weight
2: External exchange
0 to 2 0
5q f- 4
Setpoint
comparison
0: Comparison with internal count
1: Comparison with display count
1 to 2 1
5q f- 5
Comparison
0: Always output
1: Stable condition
2: At batch finish
0 to 2 2
5q f- 7
Output of zero band
0: Gross <= Zero band
1: | Gross | <= Zero band
1 to 2 1
5q f- 8
Recipe mode
0: Not used recipe sequence
1: Semi-automatic mode
2: Automatic mode
0 to 2 0
5q f- 9
Material code, free
fall value
The selection to store free fall value on
the automatic free fall compensation
or realtime free fall compensation.
0: No change
Even if automatic free fall
compensation is used, parameter
of the free fall stored in the material
code is not changed.
1: Change free fall value
The result is memorized to the
parameter of the free fall in the
material code.
0 to 1 0