A&D PD4000243 Universal Remote User Manual


 
AD-4402 Page 79
8.2.7.
8.2.7.8.2.7.
8.2.7. Command List
Command ListCommand List
Command List
Monitor Commands
Name Code Description
RDSP
Read weighing value
RW
Read gross data RGRS
Read net value RNET
Read Tare value RTAR
RFIN
Read weighing result
RF #1
RSPTxxxx
RSPT####
Read setpint or
Read comparison parameters
RSxx #1
Read material code RCODxxxx To read the details of the code. # 1
Read recipe code RRCDxxxx To read the details of the code. # 1
Read accumulation data
of material code
RTTLxxxx
Read accumulation data
of recipe code
RRTLxxxx
Read error code RERR
xxxx: Material code or recipe code.
#1: Compatible command to AD4401, AD-4403 and AD4325.
Write Commands
Name Code Description
WSPTxxxx
WSPT
%%%%
SSxx #1
Store setpoints
Store comparison parameters
SA
To store optional preliminary and zero
band. #1
Store material code WCODxxxx To store all parameters of the code.
Store recipe code WRCDxxxx To store all parameters of the code.
xxxx: Material code or recipe code.
####: When reading an active material code or recipe code during the sequence,
place four space codes (ASCII 20h).
%%%%
: When storing new parameters to material code or recipe code that is recalled
as next code in the sequence, place four space codes (ASCII 20h).
#1: Compatible command to AD4401, AD-4403 and AD4325.