Filter
Top Products
Wireless (for ISA550W and ISA570W only)
Configuring Wi-Fi Protected Setup
Cisco ISA500 Series Integrated Security Appliances Administration Guide 220
5
- Unconfigured: If you choose this option, the SSID will automatically
configure its security settings such as the SSID name and the security
mode before the wireless clients are associated to provide a secured
connection. After the wireless clients are connected, the status will be
automatically changed to “Configured.” Any change for the SSID name,
the security mode, or the WEP key or passphrase will change the status
to “Configured.”
• Network Name (SSID): Choose the SSID on which the WPS settings are
applied.
• Security: The security mode currently used for the selected SSID.
• Encryption: The encryption method currently used for the selected SSID.
STEP 4 If the wireless client device has a WPS push button, follow these steps to establish
the WPS connection:
a. Enable WPS on the security appliance.
b. Click the WPS button on this page.
c. Press the WPS push button on the wireless client device within 2 minutes.
d. Verify that the wireless client is connected to the SSID.
STEP 5 If the wireless client device has a WPS PIN number, follow these steps to establish
the WPS connection:
a. Get the PIN number used on the wireless client device.
b. Enable WPS on the security appliance.
c. Enter the PIN number in the field and click Apply to register the PIN number.
d. Enable WPS on the wireless client device within 2 minutes.
e. Verify that the wireless client is connected to the SSID.