Filter
Top Products
VPN
Configuring Teleworker VPN Client
Cisco ISA500 Series Integrated Security Appliances Administration Guide 363
8
Configuring Teleworker VPN Client
The Teleworker VPN Client feature minimizes the configuration requirements at
remote locations by allowing the security appliance to work as a Cisco VPN
hardware client to receive the security policies upon the VPN tunnel from a remote
IPsec VPN server.
After the IPsec VPN server has been configured, a VPN connection can be created
with minimal configuration on the Teleworker VPN client. When the Teleworker
VPN client initiates the VPN connection, the IPsec VPN server pushes the IPsec
policies to the Teleworker VPN client and creates the corresponding VPN tunnel.
This solution is ideal for remote offices with little IT support or for large Customer
Premises Equipment (CPE) deployments where it is impractical to configure
multiple remote devices individually.
Figure 6 IPsec Remote Access with an IPsec VPN Server
Translated
Destination Address
Any
Translated Services Any
Field Setting
Inside
10.10.10.0
Outside
DNS Server
10.10.10.163
WINS Server
10.10.10.133
Internet
Internal
network
Cisco Device
as a Cisco IPSec
VPN Server
ISA500
as a Cisco IPSec
VPN Client
Personal
Computer
Personal
Computer
Personal
Computer
283053