Cisco Systems ISA550 Universal Remote User Manual


 
Device Management
Configuring Device Properties
Cisco ISA500 Series Integrated Security Appliances Administration Guide 428
10
Custom NTP Servers: Click this option to use a custom NTP server. Enter the
IP addresses or domain names of up to two custom NTP servers in the
Server 1 Name/IP Address and Server 2 Name/IP Address fields. The
server 1 is the primary NTP server and the server 2 is the secondary NTP
server.
Current Time: Displays the current date and time synchronized with the
configured NTP server.
STEP 5 Click Save to apply your settings.
Configuring Device Properties
Use the Device Properties page to configure the host name and domain name to
identify your security appliance on the network.
STEP 1 Click Device Management > Device Properties.
STEP 2 Enter the following information:
Host Name: Enter the host name for your security appliance, which is
displayed on the network to identify your device.
Domain Name: Enter a unique domain name to identify your network.
STEP 3 Click Save to apply your settings.
Diagnostic Utilities
Use the following diagnostic utilities to access configuration of the security
appliance and to monitor the overall network health.
Ping, page 429
Traceroute, page 429
DNS Lookup, page 430
Packet Capture, page 430