Cisco Systems ISA550 Universal Remote User Manual


 
Configuration Wizards
Using the Remote Access VPN Wizard
Cisco ISA500 Series Integrated Security Appliances Administration Guide 55
2
Configuring WAN Settings, page 56
Configuring Operation Mode, page 56
Configuring Access Control Settings, page 57
Configuring DNS and WINS Settings, page 57
Configuring Backup Servers, page 58
Configuring Split Tunneling, page 58
Viewing Group Policy Summary, page 58
Configuring IPsec Remote Access User Groups, page 59
Viewing IPsec Remote Access Summary, page 59
Starting the Remote Access VPN Wizard
STEP 1 Click Configuration Wizards > Remote Access VPN Wizard.
STEP 2 On the Getting Started page, choose IPsec Remote Access from the VPN Tunnel
Type drop-down list.
STEP 3 Click Next.
Configuring IPsec Remote Access Group Policy
STEP 4 Use the IPsec Group Policy page to configure the following parameters of the
IPsec Remote Access group policy:
Group Name: Enter the name for the group policy.
IKE Authentication Method: Specify the authentication method.
- Pre-shared Key: Uses a simple, password-based key to authenticate. If
you choose this option, enter the desired value that remote VPN clients
must provide to establish the VPN connections. The pre-shared key must
be entered exactly the same here and on remote VPN clients.
- Certificate: Uses the digital certificate from a third party Certificate
Authority (CA) to authenticate. If you choose this option, select a CA
certificate as the local certificate from the Local Certificate drop-down
list and select a CA certificate as the remote certificate from the Peer
Certificate drop-down list for authentication. The selected remote
certificate on the IPsec VPN server must be set as the local certificate on
remote VPN clients.