LG Electronics STB-2000 DVR User Manual


  Open as PDF
of 86
 
11
206-4256
PICTURE
AUDIO
INPUT
OPTION
TIME
SmartShare
CHANNEL
LOCK
STB Setup Menus
Shows that the STB is in
Pass-through Mode .
Function Menu
Indicates the STB is not in Pass-through
Mode . While the STB is in this mode,
Installer Menu settings can be accessed
as read-only.
SmartShare
ABC
ASPECT RATIO
ABC
16:9
Just Scan
Set By Program
4:3
Zoom
While the STB is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items
will be read-only.
• AnyFTGcongurationchangesmustbemadeusingaTLXle(typicallyeditedintheFTGFileManager).
The FTG File Manager’sFTGChannelMapCongurationandFTGInstallerMenuCongurationUtilities
enable you to make changes, respectively, to the FTG Channel Map and FTG Installer Menu settings as
necessary. Seeinformationonlocalcongurationinthisdocumentorrefertodocumentationfortheserver
for information on remote management.
• If it becomes necessary to restore the STB to Pass-through Mode, there are several options that will enable
you to do so. See Reference section, “Restoring Factory Defaults on the STB(s),” for further information.
Pages 52 to 55 provide overviews of the utilities that comprise the FTG File Manager. Refer to the Free-
To-Guest (FTG) File Manager User Guide for further information on the FTG File Manager.
Remote Management in FTG Mode
When the STB is configured for FTG Mode, remote management of the FTG Channel Map and FTG Installer
Menu settings is provided by a Pro:Centric server, via a TLX file loaded on the Pro:Centric server Admin
Client. Refer to the Pro:Centric Server Admin Client User Guide for further information.
Determining the STB Operating Mode
To determine the operating mode of the STB, press MENU on the Installer Remote. The menu displayed
depends on the operating mode. See examples below.
If the Function Menu appears, the STB is in a mode (FTG, PPV, etc.) that does not allow the end user to
change the fundamental STB setup. If the STB setup menus appear, the STB is in Pass-through Mode.
Commercial Mode Overview (Cont.)
 previous next