Filter
Top Products
64
206-4256
Reference: Upgrading STB Software using a USB Memory Device
This section describes how to update STB (CPU) and/or PTC software using
the USB Download Menu, though you may also use the LG Smart Install utility
to upgrade software, if desired. See “LG Smart Install Utility” on pages 23 to
24 for further information.
Before You Begin
• Softwareupgradelesmustbestoredinafoldernamed“LG_DTV”inthe
root directory of the USB memory device.
• Ensure the USB device has been formatted with FAT format.
Upgrade the STB/PTC Software
Note: You can check the STB/PTC software versions by accessing the STB
Installer Menu with the Installer Remote. See “Accessing the Installer Menu”
on page 25 for further information. PTC and CPU versions are displayed in the
Installer Menu footer.
Note for STB CPU Software Upgrade only: If the STB detects a later version
of software on the USB device, it will automatically display a dialog from which
you can start the software upgrade immediately. Otherwise, you can close the
dialog, and access the USB Download Menu as described below.
1. Turn ON the STB/display panel, and then insert the USB memory device
into either of the USB ports on the STB.
2.
Press MENU on the Installer Remote to display the STB setup menus (STB
is in Pass-through Mode) or the Function Menu (STB is not in Pass-through
Mode).
3. Use the arrow navigation keys to select/highlight either the Option menu
icon from the STB setup menus or the Lock menu icon from the Function
Menu. Then, press the number “7” key a total of seven times to display the
USB Download Menu.
4. Use the Up/Down arrow keys to select Upgrade STB Software or Upgrade
PTC Software, as applicable, and press OK.
5. In the next window (STB Software Update or Upgrade PTC Software
dependingonyourselectioninstep4),select/highlighttheupdateleto
install, and then press OK.
Note: Do not select Forced Update options unless you have been
specicallyinstructedtodosoorhavepreviousexperiencewithExpert
Software Updates.
Update completion progress will be displayed on the screen in a new window.
Do NOT remove the USB device until the software upgrade is complete. When
the software upgrade is complete, the STB will reset with an automatic restart.
Upgrade PTC Software
STB-2000_v1_00_020
[ Current PTC Software Version Information ]
TXT : V1.00.020
The following software files are found in the memory card.
Note: The Diagnostics option in
this menu is for service use only.
USB Download Menu
Upgrade STB Software
Upgrade PTC Software
Diagnostics
Teach To STB (TLL)
Teach To STB (TLX)
Previous OK
STB Software Update (Expert)
STB-2000_v3_08_RevNo100_USB
[ Current STB Software Version Information ]
EPK : 03.06.00
The following software files are found in the memory card.
Select the file you want to download to this STB
or press EXIT to cancel the update.
EPK: 03.08.00
[Forced Update Option]
Ext. MICOM