LG Electronics STB-2000 DVR User Manual


  Open as PDF
of 86
 
17
206-4256
EZ-Manager Wizard (Cont.)
TV Conguration Options
FromtheTVCongurationOptionsscreen,youcanchoosehowtoproceedwiththecongurationof
this STB/display (assuming you do not opt to exit the wizard, which you may also do at any time).
Note: If you intend to use the Zoning feature(s) on the STB for location-specic
conguration purposes, select the “Zones & Room Number” option from this screen
and assign the appropriate TV Zone # and/or the Wi-Fi Zone # in the STB BEFORE
you continue with additional conguration.
Z
EZ-Manager Wizard
Exit
Next
4
3
2
1
TV Configuration Options
•ToconguretheTVforPro:Centricoperation,select‘Next’.
•TosettheoptionalZoningfeatures,select‘Zones&RoomNumber’.
•ToaccesstheTV’sUSBDownloadMenu,select‘USBConguration’.
USB Configuration
Zones & Room Number
This setup wizard will continue automatically in 60 seconds.
Note: If there is no user action in this screen within one minute, the wizard will automatically
continuetothenextcongurationstep.
Use the Left/Right arrow keys on the Installer Remote to navigate between options on this screen.
Eachtimeyouselect/highlightoneofthefollowingoptions,thescreentextandeldswillchange
in accordance with your selection.
• TocontinuewithPro:Centricconguration,selectNext (default) and press OK on the Installer
Remote.Referto“CongurePro:CentricSettings”onpages19to21foradditionalinformation.
• To set the Zoning feature(s) on the STB, select Zones & Room Number. See “Zones and Room
Number Assignments” below for further information.
• Select USB Conguration to access the STB’s USB Download Menu. See “USBConguration”
on page 22 for further information.
Note: If you have already inserted a USB memory device with the intent to use the LG Smart
Install utility and the Integrated USB Downloading screen is on display, you may still set the Zoning
features on this STB by selecting PrevioustoreturntotheEZ-Manager’sTVCongurationOptions
screen. Set the Zoning features as required, and then select USB Conguration and press OK on
the Installer Remote to return to the Integrated USB Downloading screen.
Note: If you choose to exit the EZ-Manager Wizard from this point on, you will have the option to
save any settings made by selecting Save and Exitintheexitconrmationpop-upwindow.Or,
you can exit the wizard without saving any settings by simply selecting OKintheconrmation
pop-up window.
Zones and Room Number Assignments
YoumaycompleteoneormoreoftheeldsintheZones,Label,andRoomNumber screen or
leave them at their default settings (TV Zone and Wi-Fi Zone) or blank (Label and Room Number),
as desired. However, if you intend to use either of the Zoning features—TV Zoning and/or Wi-Fi
Zoning—on this STB, you MUST specify the appropriate values in the TV Zone and/or Wi-Fi Zone
eldsasdescribedonthefollowingpage. See also Reference section, “Using the STB’s Zoning
Features,” for further information.
 previous next