LG Electronics STB-2000 DVR User Manual


  Open as PDF
of 86
 
15
206-4256
The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual)
of configuring the essential Installer Menu items for Pro:Centric operation. The wizard is initiated once the
video output resolution is set (see previous page) and subsequently each time the STB/display panel is
turned ON, until one of its configuration methods has been completed or the wizard is exited. Use the
Installer Remote to make selections and complete each wizard step.
WhiletheEZ-ManagerWizardisintendedprimarilyforPro:Centric-relatedconguration,thewizardalso
offersZoningaswellasUSBcongurationoptions.
• STB-2000ssupporttheTVZoningandWi-FiZoningfeatures,bothofwhichenablelocation-specic
settings (see Reference section, “Using the STB’s Zoning Features,” for further information). The EZ-
Manager Wizard enables you to set the TV Zone # and/or the Wi-Fi Zone # in the STB as part of the
congurationprocess.
• The EZ-Manager Wizard also enables you to redirect to the STB’s standard USB Download Menu as
partofthecongurationprocess, if desired, to perform USB congurationfunctions,includingFTGMode
conguration,cloning,andsoftwareupgrades.
• You can connect a USB memory device to the STB at any time while the wizard is in progress (starting at
theWelcomescreen)tousetheLGSmartInstallutilitytoperformUSBcongurationfunctions.Anyle(s)
youwishtouseforcongurationpurposesmustbestoredinafoldernamed“LGSMARTINSTALL” in the
root directory of the USB memory device. See “LG Smart Install Utility” on pages 23 to 24 for further
information.
Caution: Do NOT unplug the STB power cord or remove the antenna cable or, if applicable,
the LAN cable during the conguration process, as doing so will interrupt the current step
and may corrupt the conguration data.
Before You Begin
• If you plan to create a Master STB Setup using the procedure described on pages 35 to 38, be sure to exit
the EZ-Manager Wizard in order to avoid setting modes that may restrict the custom setup procedure. See
also“InitiateCongurationorExittheEZ-ManagerWizard”onthefollowingpage.
• If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can be
reactivated; however, this requires that you restore the STB to a factory default condition. See Reference
section, “Restoring Factory Defaults on the STB(s),” for further information.
• Each wizard step is allotted a time frame after which the wizard proceeds without user interaction. If the
Pro:Centricserverisconguredonthesystemandifnolocation-specicsettingsarerequiredintheSTB,
for example, TV Zone, Wi-Fi Zone, Label, and/or Room Number settings, you can simply turn ON the STB/
display,andonceinitiated,thewizardwillproceedthrougheachofthecongurationstepswithnofurther
user interaction.
• Ifanyofthecongurationstepsfails,youwillseea“Diagnostics”screenwithanindicationofthefailure.
Youwillthenhavetheopportunitytoreinitiatethecongurationprocessfromthepreviousscreenorexit
the EZ-Manager Wizard.
• If you wish to enable media sharing (i.e., Smart Share, Wi-Fi Screen Share, and DMR) on the STB without
usingaTLXleforcongurationpurposes,youwillneedtocreateacustomMasterSTBSetupanduse
the IP Environment Menu to specify the settings. Custom Master STB Setup is described on pages 35 to
38. Refer to “IP Environment Setup” on pages 56 to 63 for information on the IP Environment Menu.
EZ-Manager Wizard
 previous next