LG Electronics STB-2000 DVR User Manual


  Open as PDF
of 86
 
18
206-4256
EZ-Manager Wizard (Cont.)EZ-Manager Wizard (Cont.)
Note: ZoningfeaturesareonlyapplicableforSTBsthatwillbeconguredusingaTLXle(local or
remoteconguration).
Z
EZ-Manager Wizard
4
3
2
1
Zones, Label, and Room Number
CHVOL
1 2 3
4 5 6
7 8
0
9
P
A
G
E
Q.MENU
CHAR/NUM
FLASHBK
EXIT
OK
GUIDE
PORTAL
TV
DVD
INPUT
MARK
CC
TIMER
MUTE
INFO
PIP PIPCH+PIPCH
-
SWAP
PIP
INPUT
SAP
MENU
SETTINGS
abc def
ghi jkl mno
pqrs tuv wxyz
.,;
@
DELETE
1
2
3
4
5 6
7
8
0
9
DEL
CHAR/
NUM
Room Number
TV Zone
0
Label
-----
•If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi Zone # (1-99) based on the Wi-Fi Zone in which
this TV is installed.
•If creating Zones for Installer Menu settings and/or Channel Mapping, select the appropriate TV Zone # (0-8)
based on the Zone in which this TV is installed. (See Commercial Mode Setup Guide for more information.)
•Select a Label and/or use the alphanumeric keypad on the remote to input the Room Number.
•When done, select ‘Next’ to continue.
Exit
Next
USB Configuration
Zones & Room Number
Wi-Fi Zone
0
1. Completetheappropriateeld(s)asdescribedbelow.Use the Left/Right arrow keys on the
InstallerRemotetonavigatebetweeneachoftheelds.
• Wi-Fi Zone: EnablesyoutosetaWi-FiZone#sothattheSTBcanbeconguredwitha
particular access point’s login data for wireless networking. Login data (i.e., SSID, security
type,andsecuritykey)maybeprovidedinaTLXletobeusedforconguration.IftheWi-Fi
Zone#isleftatitsdefaultvalue(0),theSTBwillnotbeconguredwithlogindatafromaTLX
le.
ToassignaWi-FiZone,navigatetotheWi-FiZoneeldatthefarleftofthescreen,anduse
the Up/Down arrow keys to specify the desired Wi-Fi Zone # (1–99).
• TVZone:EnablesyoutosetaTVZone#sothattheSTBcanbeconguredwithInstaller
Menu and/or TV Setup Menu settings intended only for the assigned Zone. The Installer Menu
and/orTVSetupMenusettingsmaybeprovidedinaTLXletobeusedforconguration.If
theSTBisbeingconguredforFTGMode,theTVZone#settingalsoallowstheSTBtoomit
channels that have been restricted in the FTG Channel Map.
TochangetheTVZonefromitsdefaultvalue(0),navigatetotheTVZoneeld,andusethe
Up/Down arrow keys to specify the desired TV Zone # (1–8).
• Label: Allows you to select a North, South, East, or West text label for this STB. In the Label
eld,usetheUp/Downarrowkeystoselecttheapplicablelabel.
• Room Number: Allows you to specify the number of the room in which the STB is located. In
theRoomNumbereld,youcanusethenumberkeysontheInstallerRemotetodirectenter
a room number. Use the Dash key on the Installer Remote as necessary to toggle between
numberandlettercharactersintheRoomNumbereld.Also,youcanusetheFlashbackkey
ontheInstallerRemotetodeletecharactersinthiseld.A
2. When you are ready to continue, select the appropriate option, as follows:
• To proceed to the next EZ-Manager screen, use the arrow keys to select Next, and then
press OK on the Installer Remote.Continuetothe“CongurePro:CentricSettings”section
on the following page.
• If you wish to use a USB memory device in conjunction with the STB’s standard USB Download
Menutocompletetheconguration,continueto“USBConguration”onpage22.
• If you wish to use a USB memory device in conjunction with the LG Smart Install utility to
completetheconguration, see “LG Smart Install Utility” on pages 23 to 24.
 previous next