LG Electronics STB-2000 DVR User Manual


  Open as PDF
of 86
 
42
206-4256
Cloning Procedures (Cont.)
(Continued from previous page)
3. If the Master STB Setup contains a TV Zone # and/or a Wi-Fi Zone #
assignment, make sure to assign the same Zone designation(s) in the
Target STB at this time. See Reference section, “Using the STB’s Zoning
Features,” for further information.
Note: In order for the proper location-specic TV Zone and/or
Wi-Fi Zone prole data to be applied, the Zone designation(s)
must be assigned in the Target STB(s) BEFORE Teaching is
performed.
4. InserttheUSBmemorydevicewiththeTLXleintoeitheroftheUSB
ports on the Target STB.
5. Press MENU on the Installer Remote to display the STB setup menus.
Use the arrow navigation keys to select/highlight the Option menu icon,
and then press the number “7” key a total of seven times to display the
USB Download Menu.
6. With the USB Download Menu on display, use the Up/Down arrow keys to
select Teach To STB (TLX), and then press OK.
7. In the Teach To STB (TLX) window, use the Up/Down arrow keys to select
the Master STB Setup you want to install.
Note: FilenamesforTLXlesLearnedfromanSTBarecomprisedofthe
STBmodelandave-digitnumber,forexample,STB-2000-UA00003.TLX.
8. Press OK when you are ready to initiate the Teaching process.
Teaching status will be shown on a progress bar in a new window. Do NOT
remove the USB device until Teaching is complete. When the Teaching
processiscomplete,a“TeachingCompleted”windowwillbrieyappearon
the screen and the USB Download Menu will be exited.
9. Remove the USB memory device, and verify that the Master STB Setup is
now resident on the Target STB.
After the Teaching process is complete, the STB tunes according to the
setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start
Channelisspecied,theSTBwilltunetothatchannel;otherwise,theSTB
will return to the last channel tuned.
Teach To STB
UPDATING...
Do not unplug!
50%
Teach To STB (TLX)
Previous OK
STB-2000-UA00003.TLX
USB Download Menu
Upgrade STB Software
Upgrade PTC Software
Diagnostics
Teach To STB (TLL)
Teach To STB (TLX)
Previous OK
Note: The Diagnostics option in
this menu is for service use only.
 previous next