LG Electronics STB-2000 DVR User Manual


  Open as PDF
of 86
 
16
206-4256
EZ-Manager Wizard (Cont.)
Initiate Conguration or Exit the EZ-Manager Wizard
The Welcome screen provides a brief introduction to the EZ-Manager wizard.
EZ-Manager Wizard
Welcome to LG’s EZ-Manager Wizard
•UsethissetupwizardtoconguretheTVforPro:Centricand/orFree-
To-Guest (FTG) operation.
Select ‘Next’ to continue.
•IfaPro:CentricServerwillnotbeinstalledand/oryoudonotwishtouse
thewizardtocongurethisTVforFTGMode,youmayexitthewizard.
Select ‘No Pro:Centric’ to disable the Pro:Centric feature of this TV, or
select ‘Exit’ to quit.
This setup wizard will start automatically in 10 seconds.
Exit
Next
No Pro:Centric
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the
rstcongurationstep.Oncethewizardhasproceeded,itisnotpossibletoreturntotheWelcome
screen; however, if you simply wish to exit the wizard, you can do so by selecting the “Exit” option
from the subsequent screen(s).
Note:Asindicatedonthepreviouspage,youmayusetheLGSmartInstallfeaturetocongurethe
STB/display using a USB memory device at any time while the EZ-Manager Wizard is in progress.
However,ifyouwanttousetheZoningfeature(s)ontheSTBforlocation-specicconguration
purposes, proceed to the EZ-Manager’s Zones, Label, and Room Number screen and assign the
appropriate TV Zone # and/or a Wi-Fi Zone # for this STB before inserting your USB device. See
“TVCongurationOptions”onthefollowingpageforfurtherinformation.
From the Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/
highlight Next and press OK. Then,continuetothe“TVCongurationOptions”sectiononthe
following page.
• To exit the wizard, but retain the use of the Pro:Centric remote management feature on this STB
(i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on
the Installer Remote to select/highlight Exit and press OK.Intheconrmationpop-upwindow,
select OK, and then press OK once more on the Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use
thewizard’sZoningorUSBcongurationoptions,exitthewizardasfollows:Usethearrow
keys on the Installer Remote to select/highlight the No Pro:Centric option. This will disable the
Pro:Centric feature of this STB (i.e., Installer Menu item 119 DATA CHANNEL will be set to 0)
andexitthewizard.Intheconrmationpop-upwindow,selectOK, and then press OK once
more on the Installer Remote.
 previous next