LG Electronics STB-2000 DVR User Manual


  Open as PDF
of 86
 
51
206-4256
FTG Mode of Operation (Cont.)
(Continued from previous page)
4. Set Installer Menu item 003 BAND/AFC, as appropriate.
• Broadcast: Set to 0. • HRC: Set to 2.
• CATV: Set to 1 (default). • IRC: Set to 3.
5. Set any other Installer Menu items that affect your TV programming network to the required
conguration.Forexample,enable/disableAuxinputs,setaStartChannel,etc.
YoumayalsocongureanyrequiredsettingsintheIPEnvironmentMenu(accessiblefromthe
Installer Menu), for example wireless network connection settings, Pro:Centric IP settings, etc.
See “IP Environment Setup” on pages 56 to 63 for further information. However, note that you
cannot return directly to the Installer Menu from the IP Environment Menu; thus, you may wish to
set all Installer Menu items as needed before you access the IP Environment Menu. Otherwise,
you will need to reaccess the Installer Menu to set additional items.
6. After you have adjusted all Installer Menu item settings as required, press OK once on the
Installer Remote to save your changes; then, press OK again to exit the menu.
Set Up STB Features
On-screen setup menus control the features of the STB/display. Press MENU on the Installer
Remote to access the STB setup menus, and set Channel, Picture, Audio, Time, etc. options to
the desired configurations. In particular, if you intend to use the STB’s Zoning feature(s), make
sure to assign the appropriate TV Zone # and/or Wi-Fi Zone # as described in Reference section,
“Using the STB’s Zoning Features.”
Run Auto Tuning (Channel Search)
Note: Decryption of Pro:Idiom encrypted channels will not be enabled unless you use the FTG
File Manager to set the channel attributes.
1. Use the Installer Remote to access the Channel Menu. Then, select Auto Tuning and follow
the on-screen instructions to search for all available analog and digital channels.
2. Use the Channel Edit option in the Channel Menu to edit the channel lineup, as necessary.
Add/delete channels per your system requirements.
Once you have completed these procedures, return to “LearningFTGCongurationfromanSTB”
on the previous page to complete the Learn sequence.
 previous next