Filter
Top Products
HD24/96 Technical Reference 79
Time Code Rate
<< >> Selects the time code frame rate: 30, 29.97, 25,
and 24 frames/second, with choices of drop frame
or non-drop frame for 30 and 29.97 FPS.
OK Confirms the selection and returns to the SYNC
OPTIONS menu
Bit Depth (next
page [>])(->)
<< >>
Selects between 16-bit and 24-bit recording
<< >>OK Selects between 16-bit and 24-bit recording
Confirms the selection and returns to the SYNC
OPTIONS menu
OK Confirms the selection and returns to the SYNC
OPTIONS menu
Generate SMPTE
(next page [>])
<< >> Turns the SMPTE time code output On or Off.
NOTE: You cannot simultaneously generate and
chase to SMPTE. Setting this option On when the
HDR24/96 is set to TC CHASE will result in a “You
can’t do that” message.
OK Confirms the selection and returns to the SYNC
OPTIONS menu
Generate MTC
(next page [>])
(Off to the right. Accessed with the -> button)
<< >> Turns MIDI time code output On or Off
OK Confirms the selection and returns to the SYNC
OPTIONS menu
TC Offset (next
page [>])
Active only when chasing time code. When Offset is other than
zero, the transport current time is equal to the incoming time code
value plus the TC Offset value.
Set
<< >>
Moves the vv cursor over the hour,
minute, second, or frame field. Use the
(-)DEC and (+)INC buttons to
decrement or incrementchange the
value.
Zero Sets the time code offset to 00:00:00:00