Filter
Top Products
MGC Web Server Manager User’s Guide
3-55
Managing the Default Sets
The MGC Web Server Manager application is installed with an embedded
Defaults set. If no Defaults set is defined as the Global Defaults set, the
embedded Defaults set is active.
A Defaults set may be set as Private or Global Defaults. A Global Defaults
set is a default set that will apply to all the database users. A Private
Defaults set applies only to users whom it is specifically allocated as the
Private Defaults set, and is used instead of the Global Defaults set.
The administrator can select one of the default sets defined in the database
as the Global Defaults set. However, the database users can also define one
of their default sets as Private Defaults set. In such a case, the user will be
able to use this set instead of the Global Default set.
Only one Defaults set may be defined as Private Defaults set. Selecting
another Defaults set as Private Defaults Set automatically cancels the
current Private Set. One set may be defined as both Global and Private
Defaults set.
The selection of the Global and Private Default set is done separately for
each Defaults category.
If more than one database is installed, the system loads the Private defaults
from the database designated as Private and the Global Defaults from the
database designated as Global. Therefore you must define the database
from which you want to load the Private Defaults set as Private and the
database from which you want to load the Global default set as Global. You
may define the same database as both Global and Private. In that case, the
Global Defaults set and the Private Defaults set will be taken from the same
database.
You can also designate a database as Private Default and another database
as Global Default. When a user loads the Global or the Private defaults, it is
loaded from either the Private or Global Default database according to the
selected Default set. For example, if you select to load the Private Default
set, it will be loaded from the database designated as the Private Defaults
database.
Using the right-click pop-up menu you can also delete a default set or
change the default set parameters.