Filter
Top Products
Index 3
Slave, 1-4
Terminal Parameters, 3-5, 3-7
Terminal Settings, 2-4
Troubleshooting, 3-28, 4-1
Updating Flash EPROM, 5-1
Verifying Operation, 2-5
ONline Fault-Tolerant Controller Module, 3-17
ONline System Concentrators, 1-4, 3-8
on-line technical services, D-1
ONline Token Ring MAU Module, 3-17
Out-of-Band Download Instructions, 5-4
P
Passwords
Administrator
, 3-9, 3-10
Establishing, 3-9
User , 3-9, 3-11
Port
Mode
, 3-19
Port Configuration
Set Address-to-Port Security
, 3-21
Precautionary Procedures, 2-1
Electrostatic Discharge, 2-1
ProComm Software
Installing
, 5-4
Protocols, 4-8
Packet Structure, 4-8
Protocol Header, 4-9
Remote Character Protocol, 4-8
R
Remote Character Protocol, 4-8
Remote Login, 3-22
Telnet, 1-8, 3-22
Remote Session
Logging Out
, 3-24
Reset Device Command, 2-8
returning products for repair, D-4
Revert Command, 3-4
Reverting Configuration Values, 3-4
RS-232 Cable
Cable Specifications
, B-1
Con n ecting, 5-8
Modem Use, B-2
Serial Port, 2-8
S
Saving Configuration Values, 3-3
Set Alert Command, 3-15
Set Concentrator Platform Command, 3-8
Set Device Contact Command, 3-12
Set Device Default_Gateway Command, 3-16
Set Device Diagnostics Command, 3-12
Set Device IP_Address Command, 3-15
Set Device Location Command, 3-12
Set Device Name Command, 3-12
Set Device Subnet_Mask Command, 3-16
Set Device Trap_Receive Command, 3-17
Set Module Mastership_Priority Command,
3-18
Setting SNMP Values
Alert Setting
, 3-15
Community Table, 3-15
IP Address, 3-15
Subnetwork Mask, 3-16
Trap Receive, 3-16
Show Community Command, 3-15
Show Concentrator Command, 3-26
Show Counter Command, 3-27
Show Module All Command, 3-25
Show Port Command, 3-26
Showing
Counter Statistics
, 3-27
Module Information, 3-25
Port Information, 3-26
Simple Network Management Protocol, 3-13
Setting Values, 3-13, 3-14
Simple Network Mangement Protocol
Setting Values
, 3-14
SNMP
Agent
, 3-13