Filter
Top Products
Software Download Instructions 5 - 9
Warning: Do not interrupt power to the concentrator during the
download process or you may corrupt the Flash EPROM.
1. Make a backup copy of the 3Com UDK diskette.
2. Place the 3Com UDK diskette in the floppy drive and change to that
drive by typing a: or b:.
3. Type the command UDK and press [ENTER] to display the initial
installation screen as shown in Figure 5-4.
A:> UDK [ENTER]
Figure 5-4. Initial UDK Installation Screen
4. Enter the letter of the source drive (where you inserted the 3Com
UDK diskette) following the “Enter the Source Drive:” prompt. Then
press the Down Arrow key (↓) or [TAB] to move the cursor to the
next field.
Chipcom CORPORATION
Update Distribution Kit Copyright 199X Chipcom Corporation
This Update Distribution Kit will start ProCommso you can
download new software to your 3Com device. Make sure you follow
the instructions carefully to avoid downloading the wrong file
to your device. Downloading the wrong file may damage the
device.
Enter the Source Drive :
Enter the ProCcomm Drive :
Start Procomm
Press ENTER to accept the current drive selections and start
ProComm.
, TAB: Next Field : Previous Filed Enter: Accept ESC: Quit
*******************************************************************
*******************************************************************
******************
******************